Intel has officially started shipping the “0x129” microcode update for its 13th and 14th generation “Raptor Lake” and “Raptor Lake Refresh” processors. This critical update is currently being pushed to all OEM/ODM partners to address the stability issues that Intel’s processors have been facing. According to Intel, this microcode update fixes “incorrect voltage requests to the processor that are causing elevated operating voltage.” Intel’s analysis shows that the root cause of stability problems is caused by too high voltage during operation of the processor. These increases to voltage cause degradation that increases the minimum voltage required for stable operation. Intel calls this “Vmin”—it’s a theoretical construct, not an actual voltage, think “speed for an airplane required to fly”. The latest 0x129 microcode patch will limit the processor’s voltage to no higher than 1.55 V, which should avoid further degradation. Overclocking is still supported, enthusiasts will have to disable the eTVB setting in their BIOS to push the processor beyond the 1.55 V threshold. The company’s internal testing shows that the new default settings with limited voltages with standard run-to-run variations show minimal performance impact, with only a single game (Hitman 3: Dartmoor) showing degradation. For a full statement from Intel, see the quote below.