ASRock is ready with the first Radeon RX gaming graphics card to feature a modern 12V-2×6 power connector, replacing the up to three 8-pin PCIe power connectors it took, to power a Radeon RX 7900 series graphics card. The ASRock RX 7900 series WS graphics cards are also the first 2-slot RX 7900 series graphics cards. They target workstations and GPU rendering farms that stack multiple graphics cards into 4U or 5U rackmount cases, with no spacing between 2-slot graphics cards. ASRock is designing cards based on both the RX 7900 XT, and the flagship RX 7900 XTX.
The ASRock RX 7900 series WS graphics cards appear long and no more than 2 slots thick. To achieve these dimensions, a lateral-flow cooling solution is used, which combines a dense aluminium or copper channel heatsink with a lateral blower. Remember we said these cards are meant for workstations or rendering farms? So the noise output will be deafening, at least up to datacenter standards. The most striking aspect of these cards of course is their 12+4 pin ATX 12V-2×6 power input, which is capable of drawing 600 W of continuous power from a single cable. It’s located at the card’s tail-end, where it would have been an engineering challenge to put three 8-pin connectors.